From 70a1367a0ff350a93a3934cd47c32211bc002c04 Mon Sep 17 00:00:00 2001 From: v3d Date: Tue, 29 Jan 2019 02:17:40 +0000 Subject: [PATCH] Update pivilion manual setup --- pivilion-manual-setup.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/pivilion-manual-setup.md b/pivilion-manual-setup.md index 8769536..3269994 100644 --- a/pivilion-manual-setup.md +++ b/pivilion-manual-setup.md @@ -21,7 +21,10 @@ You can also download the complete pre-installed appliance image and run Pivilio 1. Micro USB power adapter (check RPi requirements, but ideally 2.5A) - a cable is also fine (you can connect to any USB port) 1. Min 8 GB (micro)SD card 1. SD card reader (and a microSD to SD adapter if necessary) -1. Ethernet cable - optional - you can connect the RPi to a HDMI screen (plus a USB mouse + keyboard) and connect it to WiFi as you would any computer. However, this setup is meant to be made over SSH - consider your Pi a server (even though it's on a table next to you :)). You can connect it to a display and once you input the WiFi password, just connect to the Pi via SSH from a different computer. +1. Ethernet cable - optional +1. HDMI cable - optional + +You can connect the RPi to a HDMI screen (plus a USB mouse + keyboard) and connect it to WiFi as you would any computer. However, this setup is meant to be made over SSH - consider your Pi a server (even though it's on a table next to you :)). You can connect it to a display and once you input the WiFi password, just connect to the Pi via SSH from a different computer. ### Software 1. [Raspbian image](https://www.raspberrypi.org/downloads/raspbian/)